Water Pump METELLI 24-0385
- Manufacturer
- METELLI
- Part number
- 24-0385
- Part type
- Water Pump
- Fitting
- Number of Teeth: 20, with seal, do not use sealant, mechanical, Grey Cast Iron, Water pump pulley Ø: 59,4 mm, for Timing Belt Drive
Product image not published
We publish a photograph only when it is confirmed to show this exact part. No stock or look-alike pictures are used. Our team verifies the part visually while preparing your quote.
Technical specification
| Water Pump Impeller Material | Grey Cast Iron |
|---|---|
| Number of Teeth | 20 |
| Water Pump Design | for Timing Belt Drive |
| Operating Mode | mechanical |
| Impeller Diameter [mm] | 61,2 |
| Supplementary Article / Info | with seal, do not use sealant |
| Number of Blades | 7 |
| Water Pump Pulley Diameter [mm] | 59,4 |
| Condition | Brand New |
Specification data is supplied by the manufacturer and is confirmed against your vehicle during quotation review.
Vehicle compatibility 12 variants
HONDA 3
- CRX I Coupe (AF, AS) (1983 - 1987) — 1.3 (AF1) (52 kW / 71 PS) (1983 - 1987) · 1.5 i (74 kW / 101 PS) (1983 - 1986)
- Civic I Shuttle (AN, AR) (1983 - 1987) — 1.3 (AN2) (52 kW / 71 PS) (1983 - 1987) · 1.5 (63 kW / 86 PS) (1983 - 1987) · 1.5 4WD (63 kW / 86 PS) (1985 - 1987)
- Civic III Hatchback (AL, AJ, AG, AH) (1983 - 1987) — 1.2 (40 kW / 54 PS) (1984 - 1987) · 1.3 (52 kW / 71 PS) (1983 - 1987) · 1.5 (69 kW / 94 PS) (1984 - 1987) · 1.5 GL (63 kW / 86 PS) (1983 - 1987) · 1.5 GT (74 kW / 101 PS) (1985 - 1987) · 1.5 GTI (66 kW / 90 PS) (1986 - 1987)
ROVER 1
- 200 Limousine (XH) (1985 - 1989) — 1.3 S (54 kW / 73 PS) (1985 - 1989)