Clutch Kit STATIM 100.250

Manufacturer: STATIM
Part number: 100.250
Part type: Clutch Kit
Fitting: 235mm, - pull-type

Representative image. This photograph shows the part type “Clutch Kit”, not this specific article.
Pedro Ribeiro Simões from Lisboa, Portugal · CC BY 2.0 · Wikimedia Commons

Technical specification

Diameter	235
Transmission Type	MG5T
Hub Profile	21,4x24 - 21N
Characteristic Value	- pull-type
Condition	Brandneu

Specification data is supplied by the manufacturer and is confirmed against your vehicle during quotation review.

Vehicle compatibility 16 variants

CITROËN 2

Jumper I Bus (230) (1994 - 2002) — 2.8 HDi (94 kW / 128 PS) (2000 - 2002) · 2.8 HDi 4x4 (94 kW / 128 PS) (2000 - 2002)
Jumper I Kastenwagen (230) (1994 - 2002) — 2.8 HDi (94 kW / 128 PS) (2000 - 2002) · 2.8 HDi 4x4 (94 kW / 128 PS) (2000 - 2002)

FIAT 2

Ducato II Bus (230) (1994 - 2002) — 2.8 JTD (94 kW / 128 PS) (2000 - 2002) · 2.8 JTD 4x4 (94 kW / 128 PS) (2000 - 2002) · 2.8 TDI (90 kW / 122 PS) (1997 - 2002) · 2.8 TDI 4x4 (90 kW / 122 PS) (1999 - 2002)
Ducato II Kastenwagen (230L) (1994 - 2005) — 2.8 JTD (94 kW / 128 PS) (2000 - 2002) · 2.8 JTD 4x4 (94 kW / 128 PS) (2000 - 2002) · 2.8 TDI (90 kW / 122 PS) (1997 - 2002) · 2.8 TDI 4x4 (90 kW / 122 PS) (1999 - 2002)

PEUGEOT 1

Boxer Kastenwagen (230) (1994 - 2003) — 2.8 D (64 kW / 87 PS) (1999 - 2002) · 2.8 HDI (94 kW / 128 PS) (2000 - 2002) · 2.8 HDi (93 kW / 126 PS) (2000 - 2001) · 2.8 HDi 4x4 (94 kW / 128 PS) (2000 - 2002)