Drive Shaft LÖBRO 300641
- Manufacturer
- LÖBRO
- Part number
- 300641
- Part type
- Drive Shaft
- Fitting
- Rear Axle left, Rear Axle right, 584mm, Automatic Transmission, Manual Transmission, with nut
Product image not published
We publish a photograph only when it is confirmed to show this exact part. No stock or look-alike pictures are used. Our team verifies the part visually while preparing your quote.
Technical specification
| Fitting Position | Rear Axle left, Rear Axle right |
|---|---|
| Transmission Type | Automatic Transmission, Manual Transmission |
| Length [mm] | 584 |
| External Toothing, wheel side | 27 |
| Joint Diameter, wheel side [mm] | 86 |
| Joint Diameter, transmission side [mm] | 100 |
| Seal Ring Diameter [mm] | 64 |
| Thread Size | M22x1.5 |
| Supplementary Article / Info 2 | with nut |
| Bolt Circle Ø [mm] | 86 |
| Number of Bores | 6 |
| Bore Diameter [mm] | 10,20 |
| Condition | Remanufactured |
Specification data is supplied by the manufacturer and is confirmed against your vehicle during quotation review.
Vehicle compatibility 21 variants
BMW 2
- 3 (E30) Limousine (1982 - 1992) — 315 1.6 (55 kW / 75 PS) (1982 - 1991) · 316 (66 kW / 90 PS) (1983 - 1988) · 316 (Ecotronic) (66 kW / 90 PS) (1983 - 1988) · 316i 1.6 (73 kW / 100 PS) (1987 - 1991) · 316i 1.6 (75 kW / 102 PS) (1988 - 1991) · 316i 1.8 (75 kW / 102 PS) (1987 - 1988) · 318i (83 kW / 113 PS) (1987 - 1991) · 318i 1.8 (75 kW / 102 PS) (1984 - 1988) · 318i 1.8 (77 kW / 105 PS) (1982 - 1987) · 318i 1.8 (85 kW / 115 PS) (1987 - 1991) · 318is 1.8 (100 kW / 136 PS) (1989 - 1991) · 320i (95 kW / 129 PS) (1986 - 1991) +6
- 3 (E30) Touring (1987 - 1994) — 316i 1.6 (73 kW / 100 PS) (1991 - 1994) · 316i 1.6 (75 kW / 102 PS) (1991 - 1994) · 318i 1.8 (83 kW / 113 PS) (1989 - 1994)